Chevron Left
Zurück zu Introduction to FPGA Design for Embedded Systems

Kursteilnehmer-Bewertung und -Feedback für Introduction to FPGA Design for Embedded Systems von University of Colorado Boulder

4.6
Sterne
893 Bewertungen
210 Bewertungen

Über den Kurs

This course can also be taken for academic credit as ECEA 5360, part of CU Boulder’s Master of Science in Electrical Engineering degree. Programmable Logic has become more and more common as a core technology used to build electronic systems. By integrating soft-core or hardcore processors, these devices have become complete systems on a chip, steadily displacing general purpose processors and ASICs. In particular, high performance systems are now almost always implemented with FPGAs. This course will give you the foundation for FPGA design in Embedded Systems along with practical design skills. You will learn what an FPGA is and how this technology was developed, how to select the best FPGA architecture for a given application, how to use state of the art software tools for FPGA development, and solve critical digital design problems using FPGAs. You use FPGA development tools to complete several example designs, including a custom processor. If you are thinking of a career in Electronics Design or an engineer looking at a career change, this is a great course to enhance your career opportunities. Hardware Requirements: You must have access to computer resources to run the development tools, a PC running either Windows 7, 8, or 10 or a recent Linux OS which must be RHEL 6.5 or CentOS Linux 6.5 or later. Either Linux OS could be run as a virtual machine under Windows 8 or 10. The tools do not run on Apple Mac computers. Whatever the OS, the computer must have at least 8 GB of RAM. Most new laptops will have this, or it may be possible to upgrade the memory....

Top-Bewertungen

KS
30. Juli 2020

This is an extremely good course and I learned a lot. Thank you very much sir "Timothy Scherr " and all the people who make this a such a nice one. Also thank you very much "COURSERA" !!!

RD
24. Okt. 2018

Very good course, focused on the quartus prime tool and touch a lot of topics on FPGA design, optimization, time analysis and a little of comparison between Altera and other FPGA vendors.

Filtern nach:

201 - 209 von 209 Bewertungen für Introduction to FPGA Design for Embedded Systems

von Adwait K

19. März 2018

Not a course to learn a great deal about FPGA's. Seems like an elaborated explanation of a reference manual to use the Quartus Prime software.

von Xiaohang G

23. Aug. 2020

no professor answering my any questions

von Carlo D

5. Dez. 2020

This course is just a very slow paced and boring tutorial on Quartus Prime. Every lesson is simply a sequence of button to be pressed in Quartus, with no real explanation on why things are done and no room for thinking. Quiz questions are very bad written and show lack of interest in this course. Peer reviewed assignments are a waste of time and mainly consist of screenshots of Quartus reports. If you know digital design already, there is nothing to learn here. Equally, if you don't know it, this won't help you. Not recommented at all, in particular if you hope to learn something about FPGAs.

von Gasper

28. Apr. 2018

This course is just weird, too much content crammed into "powerpoint" style of modern education. Buy a book, watch youtube fpga content lecture videos, join a university class,...

von Steaven M M

23. März 2021

Resource files not updated or checked to coincide with videos. Videos does not always prompt you when to take screenshots in week 4 until peer assessment section.

von Carlos M

17. Aug. 2018

Software cannot be downloaded

von Joynul A

26. Jan. 2021

It's too hard to complete

von Tarek M A M

25. Jan. 2021

Very Advanced and brief

von Marco M

12. Okt. 2019

very bad explanation.