Chevron Left
Zurück zu Introduction to FPGA Design for Embedded Systems

Kursteilnehmer-Bewertung und -Feedback für Introduction to FPGA Design for Embedded Systems von University of Colorado Boulder

4.6
Sterne
880 Bewertungen
207 Bewertungen

Über den Kurs

This course can also be taken for academic credit as ECEA 5360, part of CU Boulder’s Master of Science in Electrical Engineering degree. Programmable Logic has become more and more common as a core technology used to build electronic systems. By integrating soft-core or hardcore processors, these devices have become complete systems on a chip, steadily displacing general purpose processors and ASICs. In particular, high performance systems are now almost always implemented with FPGAs. This course will give you the foundation for FPGA design in Embedded Systems along with practical design skills. You will learn what an FPGA is and how this technology was developed, how to select the best FPGA architecture for a given application, how to use state of the art software tools for FPGA development, and solve critical digital design problems using FPGAs. You use FPGA development tools to complete several example designs, including a custom processor. If you are thinking of a career in Electronics Design or an engineer looking at a career change, this is a great course to enhance your career opportunities. Hardware Requirements: You must have access to computer resources to run the development tools, a PC running either Windows 7, 8, or 10 or a recent Linux OS which must be RHEL 6.5 or CentOS Linux 6.5 or later. Either Linux OS could be run as a virtual machine under Windows 8 or 10. The tools do not run on Apple Mac computers. Whatever the OS, the computer must have at least 8 GB of RAM. Most new laptops will have this, or it may be possible to upgrade the memory....

Top-Bewertungen

RD
24. Okt. 2018

Very good course, focused on the quartus prime tool and touch a lot of topics on FPGA design, optimization, time analysis and a little of comparison between Altera and other FPGA vendors.

KS
30. Juli 2020

This is an extremely good course and I learned a lot. Thank you very much sir "Timothy Scherr " and all the people who make this a such a nice one. Also thank you very much "COURSERA" !!!

Filtern nach:

51 - 75 von 206 Bewertungen für Introduction to FPGA Design for Embedded Systems

von Paul E E

5. Apr. 2020

This is a great course.However, the moderators of this course should properly check the assignments submitted by students as many submission are copied or plagiarized.

von Muhammad Z Y

9. Mai 2020

Excellent Course and teaching methods along practical work is wonderful. Happy to learn this course on time. May it would be key stone for MS admission or career.

von Ahmed-Khalifa

18. Dez. 2020

A very good course. It is easy to stay focused. I learned a lot, especially about Qsys systems and the timing analysis in Quartus! The teacher is great too.

von Arnt J W

25. Okt. 2020

Good intro course. Requires some knowledge with digital design beforehand. It's demanding but worth it putting the effort into mastering this course.

von Arsalan G

23. Dez. 2020

It was an amazing course in both learning how to work with Quartus prime and also in designing system design. Thanks for this fantastic course

von Ashraf A

9. März 2020

Great Course specially for beginners in FPGA design field, In my opinion this course will give the student very good base in this field.

von ASWAND B

20. Juli 2020

This course is very useful for beginner..overall about quatrus prime is covered.it will helpful for beginner to known about quatrus.

von Ketan J R

10. Mai 2020

The course content was best and delivered by the Instructor very effectively. Thanks to Prof. Timothy Scherr and all team members.

von Venkata L K

6. Mai 2020

Good course but assigment doing was difficult as tool was not supporting all in student version for free.

Topics were good

von Anurag S R

21. Okt. 2017

Gives you a quick run down on designing FPGA systems without going into the details of VHDL or schematics. Good exercises.

von Süleyman T S

17. Dez. 2020

This is a best course about FPGA Design. It's so effective. Thanks for financial aid and incredibly details about FPGA.

von Mucha. S r

29. Aug. 2020

Awesome course didn't get this stuff anywhere and lecture was brilliant .I'm going to enroll the other courses.

von Jhoan E L E

10. März 2021

An excellent introductory course for FPGA design. I have learned a lot of new skills with FPGAs and Quartus.

von Alpaslan T

3. Feb. 2020

The content of the course and the assignments are very good. One can learn both the theory and the practice.

von Aqil G

22. Nov. 2019

Well design course but post courses like HDL programming for logic design should start as soon as possible.

von BODIREDDY S D S

2. Sep. 2019

Really enjoy the course and learn citting edge techniques for FPGA design which help my career development.

von HIMANSHU S

27. Sep. 2018

The instructor was really good,only if we can be taught some programming bit also it would have been better

von Carlin R C

23. Sep. 2018

Good course, solid introduction, I feel familiar with the IDE, and FPGAs now, where is the second course?

von Dmitry K

9. Apr. 2021

The course gives valuable initial knowledge and real practical skills regarding FPGA development.

von abounnasr a

10. Nov. 2020

It is a good course who guided me to discover a lot of new informations about the FPGA and CPLD .

von jose l S D

14. Okt. 2020

hello I learned a lot about the basic concepts of FPGAs, with a simple and interactive language

von Diego O B

27. Mai 2019

Altamente recomendable, más allá del idioma nativo que uno tenga es muy intuitiva la propuesta.

von Alina V

18. Apr. 2021

Learned a lot about FPGAs on this course! Coursera is the best online courses Platform ever!!

von A H R

16. März 2019

The course was challenging and exciting and very useful, the way they trained us is awesome

von Pranabesh B

18. Dez. 2020

Nice course for a beginner, with lots of detail information about all CPLD/FPGA devices.