Chevron Left
Zurück zu Motors and Motor Control Circuits

Bewertung und Feedback des Lernenden für Motors and Motor Control Circuits von University of Colorado Boulder

4.7
Sterne
907 Bewertungen
214 Bewertungen

Über den Kurs

This course can also be taken for academic credit as ECEA 5341, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Top-Bewertungen

LL

9. Juli 2020

This course and lectures deliver what is promised: about AC and DC motor.\n\nIf you are looking to learn about this subject, this is one of the best online class that you can find.\n\nHappy learning!

RR

9. Apr. 2020

The course has given me a brief idea about how to choose a motor for my application. Real time application videos and laboratory exercises which really enhances the knowledge about AC and DC Motors.

Filtern nach:

76 - 100 von 214 Bewertungen für Motors and Motor Control Circuits

von Raees M

6. Okt. 2020

Course literature is very good

von Dipti M

18. Aug. 2020

Excellent courses for learning

von Dongari V

8. Mai 2020

Very good and more informative

von Ahmed S

18. Apr. 2019

This is a useful tricky course

von Always S

3. März 2022

Great Course , Helps me a lot

von Jeremiah E I

17. Apr. 2021

Good course, but very tasking

von Deep K

29. Juli 2020

Jay Mendelson is too good !!

von Emmanuel T

16. Feb. 2022

It was a good course at all

von Shashi K R R

6. Mai 2020

Good course on ac machines.

von Varun R

4. Aug. 2021

VeryVerVerVery Nice course

von Abioye T O A

16. Juli 2021

It is an excellent course

von Mohit M

3. Mai 2020

it's very helpfull for me

von Subhadip S

21. Juli 2020

very much useful course

von venkata n s m k

2. Juli 2020

it is useful to my life

von Avinash K

5. Juni 2020

it was a great session.

von moustafa a a

16. Okt. 2020

The best learning site

von Amisha S

16. Mai 2020

This course is so good

von Mrs. V C

3. Nov. 2021

Excellent course work

von nadeem a

29. März 2022

informing and useful

von Ugyen C

7. Aug. 2020

excellent tutorial

von Mark K

27. Okt. 2021

Excellent course.

von HARINI S

24. Sep. 2020

nice presentation

von G V

17. Mai 2020

I love the course

von Akshay A

26. Apr. 2020

very good course.

von Jahangir A

14. Juli 2020

Excellent Course