The Raspberry Pi is a small, affordable single-board computer that you will use to design and develop fun and practical IoT devices while learning programming and computer hardware. In addition, you will learn how to set up up the Raspberry Pi environment, get a Linux operating system running, and write and execute some basic Python code on the Raspberry Pi. You will also learn how to use Python-based IDE (integrated development environments) for the Raspberry Pi and how to trace and debug Python code on the device. Please note that this course does not include discussion forums.
Dieser Kurs ist Teil der Spezialisierung Spezialisierung An Introduction to Programming the Internet of Things (IOT)
von
Spezialisierung An Introduction to Programming the Internet of Things (IOT)University of California, IrvineÜber diesen Kurs
419,488 kürzliche Aufrufe
Karriereergebnisse der Lernenden
23%
nahm einen neuen Beruf nach Abschluss dieser Kurse auf
26%
ziehen Sie für Ihren Beruf greifbaren Nutzen aus diesem Kurs
Zertifikat zur Vorlage
Erhalten Sie nach Abschluss ein Zertifikat
100 % online
Beginnen Sie sofort und lernen Sie in Ihrem eigenen Tempo.
Flexible Fristen
Setzen Sie Fristen gemäß Ihrem Zeitplan zurück.
Ca. 14 Stunden zum Abschließen
Englisch
Untertitel: Englisch
Kompetenzen, die Sie erwerben
Computer ProgrammingPython ProgrammingInternet Of Things (IOT)Raspberry Pi
Karriereergebnisse der Lernenden
23%
nahm einen neuen Beruf nach Abschluss dieser Kurse auf
26%
ziehen Sie für Ihren Beruf greifbaren Nutzen aus diesem Kurs
Zertifikat zur Vorlage
Erhalten Sie nach Abschluss ein Zertifikat
100 % online
Beginnen Sie sofort und lernen Sie in Ihrem eigenen Tempo.
Flexible Fristen
Setzen Sie Fristen gemäß Ihrem Zeitplan zurück.
Ca. 14 Stunden zum Abschließen
Englisch
Untertitel: Englisch
von
University of California, Irvine
Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.
Lehrplan - Was Sie in diesem Kurs lernen werden
4 Stunden zum Abschließen
Module 1
This module describes the basic functionality the Raspberry Pi B+ board. I'll describe how to set up the board, configure it, and use it. An important point differentiating Raspberry Pi from the Arduino platform which we have talked about previously is that Raspberry Pi uses an operating system. I'll describe some of the implications of an operating system on the behavior of the Raspberry Pi as an IoT device.
4 Stunden zum Abschließen
10 Videos (Gesamt 55 min), 4 Lektüren, 2 Quiz
10 Videos
Lecture 1.1 - Raspberry Pi Board (Updated)2m
Lecture 1.2 - Raspberry Pi Processor5m
Lecture 1.3 - Raspberry Pi vs. Arduino (Updated)7m
Lecture 2.1 - Operating System Benefits7m
Lecture 2.2 - Processes8m
Lecture 2.3 - Raspberry Pi IoT4m
Lecture 3.1 - Raspberry Pi Setup5m
Lecture 3.2 - Raspberry Pi Configuration5m
Lecture 3.3 - Overclocking (Updated)8m
4 Lektüren
Pre-Course Survey10m
Course Overview10m
Module 1 Objectives10m
Module 1 Reading10m
1 praktische Übung
Module 1 Quiz16m
3 Stunden zum Abschließen
Module 2
The Raspberry Pi is typically installed with a Linux-based operating system, so we present the basics of Linux and its use. We describe some of the main features including navigating the file system and managing processes. We describe the text-based user interface through the shell and we overview the graphic user interface which is the default with the Raspian Linux distribution.
3 Stunden zum Abschließen
10 Videos (Gesamt 44 min), 2 Lektüren, 2 Quiz
10 Videos
Lecture 1.1 - Linux Basics4m
Lecture 1.2 - Login2m
Lecture 1.3 - Linux Filesystem (Updated)3m
Lecture 2.1 - Navigating the Filesystem (Updated)8m
Lecture 2.2 - Text Editors (Updated)4m
Lecture 2.3 - Accessing Files4m
Lecture 3.1 - Permissions6m
Lecture 3.2 - Processes3m
Lecture 3.3 - Linux Graphic User Interface3m
2 Lektüren
Module 2 Objectives10m
Module 2 Reading10m
1 praktische Übung
Module 2 Quiz16m
3 Stunden zum Abschließen
Module 3
We present the basics of the Python programming language to prepare you for programming on the Raspberry Pi. Many languages can be used but Python is the most convenient for the Raspberry Pi because convenient APIs are provided for basic operations such as controlling the pins. Python is a powerful language with useful features that we will present so that you can use these features to control the Raspberry Pi.
3 Stunden zum Abschließen
10 Videos (Gesamt 45 min), 2 Lektüren, 2 Quiz
10 Videos
Lecture 1.1 - Python on Raspberry Pi7m
Lecture 1.2 - Python Programming Environment6m
Lecture 1.3 - Python Expressions3m
Lecture 2.1 - Strings6m
Lecture 2.2 - Functions4m
Lecture 2.3 - Function Arguments3m
Lecture 3.1 - Lists3m
Lecture 3.2 - List Methods3m
Lecture 3.3 - Control Flow5m
2 Lektüren
Module 3 Objectives10m
Module 3 Reading10m
1 praktische Übung
Module 3 Quiz16m
4 Stunden zum Abschließen
Module 4
In this module we describe how to communicate with devices through the pins of the Raspberry Pi. We examine the RPi.GPIO library which provides Python functions used to access the pins. We discuss how to set up the pins, apply digital voltages, and generate Pulse Width Modulated signals. We also describe the Tkinter Python library and show how it can be used to access pins through a graphic user interface.
4 Stunden zum Abschließen
10 Videos (Gesamt 52 min), 3 Lektüren, 2 Quiz
10 Videos
Lecture 1.1 - General Purpose IO Pins6m
Lecture 1.2 - Protocol Pins4m
Lecture 1.3 - GPIO Access4m
Lecture 2.1 - General Purpose IO Pins (Updated)4m
Lecture 2.2 - Pulse Width Modulation8m
Lecture 2.3 - Demo of a Blink5m
Lecture 3.1 - Graphic User Interface6m
Lecture 3.2 Tkinter Library3m
Lecture 3.3 - Interaction6m
3 Lektüren
Module 4 Objectives10m
Module 4 Reading10m
End-of-Course Survey10m
1 praktische Übung
Module 4 Quiz16m
Bewertungen
Top-Bewertungen von THE RASPBERRY PI PLATFORM AND PYTHON PROGRAMMING FOR THE RASPBERRY PI
von GB8. März 2018
Extremely helpful if you want to start using Raspberry Pi. Gives you the required knowledge to kickstart your Raspberry Pi learning and you get a hint of python programming as well which is useful
von JP27. Apr. 2017
It was very good, all the basics about python and the raspberry pi platform. I would like if you publish a book to read about the topics, for example I have been reading the book "Think Python".
von PR13. Apr. 2020
Good Introduction to both platforms: Raspberry Pi\n\nPython\n\nNice and simple teaching however, I didn't prefer the peer evaluation as my certificate would be delayed by their submission.
von DR8. März 2017
Content is interesting, even the Twitter section (which looks unrelated to the main goal of the course). Some classes were recorded using Python 2 while the course targets Python 3.
Über den Spezialisierung An Introduction to Programming the Internet of Things (IOT)
Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.
This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, you’ll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums.
Häufig gestellte Fragen
When will I have access to the lectures and assignments?
Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:
The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.
The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
What will I get if I subscribe to this Specialization?
When you enroll in the course, you get access to all of the courses in the Specialization, and you earn a certificate when you complete the work. Your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile. If you only want to read and view the course content, you can audit the course for free.
What is the refund policy?
If you subscribed, you get a 7-day free trial during which you can cancel at no penalty. After that, we don’t give refunds, but you can cancel your subscription at any time. See our full refund policy.
Is financial aid available?
Yes, Coursera provides financial aid to learners who cannot afford the fee. Apply for it by clicking on the Financial Aid link beneath the "Enroll" button on the left. You'll be prompted to complete an application and will be notified if you are approved. You'll need to complete this step for each course in the Specialization, including the Capstone Project. Learn more.
Haben Sie weitere Fragen? Besuchen Sie das Hilfe-Center für Teiln..
© 2020 Coursera Inc. Alle Rechte vorbehalten.
