Chevron Left
Zurück zu Sensors and Sensor Circuit Design

Bewertung und Feedback des Lernenden für Sensors and Sensor Circuit Design von University of Colorado Boulder

4.6
Sterne
1,053 Bewertungen

Über den Kurs

This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Top-Bewertungen

CM

28. Mai 2020

This course is really tailormade and covers many aspect of sensor and sensor circuit design in minute details. The assignments and course project ensure the students engagement and learning.

NC

16. Sep. 2020

It was amazing experience about how the course was so professionally held .It was amazing i have learning different things right from practical to theory it absolutely brilliant.

Filtern nach:

1 - 25 von 243 Bewertungen für Sensors and Sensor Circuit Design

von paradigminversion

30. Nov. 2021

von Junghee K

27. Aug. 2019

von Kadiri C

26. Jan. 2019

von Rebecca G

13. Mai 2019

von Thomas H

16. Feb. 2019

von Carlos N G

2. Juli 2019

von Sylvain G

19. Apr. 2020

von Md H

6. März 2019

von Jesper B C

10. Juni 2020

von Bharti r k

17. Mai 2020

von Chandrashekhar M M

28. Mai 2020

von tanmay n

30. März 2020

von Manuel C

21. Feb. 2019

von Shane m

4. Apr. 2019

von Aakriti B

19. März 2019

von Richard J

12. Feb. 2020

von J A P

7. Dez. 2019

von Enrique V

25. Apr. 2020

von RAFIH P

14. Juni 2020

von Ahmed M A F

9. März 2020

von akshat m

2. Nov. 2019

von PALLAVI M

2. Sep. 2020

von HASSAN B T

14. Juli 2020

von Nofri W C

17. Sep. 2020

von Ryan C

10. Feb. 2019