Build Device Messaging and Communication in Azure IoT Hub
16 Bewertungen

3.156 bereits angemeldet
Learn to create and configure Azure IoT hub
Learn to send device-to-cloud and cloud-to-device messages
Learn to use message routing with Azure IoT Hub
16 Bewertungen
3.156 bereits angemeldet
Learn to create and configure Azure IoT hub
Learn to send device-to-cloud and cloud-to-device messages
Learn to use message routing with Azure IoT Hub
In this 1-hour long project-based course, we'll create an instance of Azure IoT hub. Once we have our hub, we'll then create devices that we can use for testing. Then we’ll learn to send the device to cloud(d2c) and cloud to device(c2d) messages using VS code, Azure CLI, and Azure portal. We will also learn to monitor the messages that are sent back and forth from our hub. Then we'll see how we can simulate a device for sending messages all without writing a single line of code from the Azure CLI. We’ll also learn to configure an IoT hub to facilitate file uploads from the devices and to store the file, we will also learn to create blob storage in the Azure cloud. Additionally, we’ll also see how we can make use of a simulator to send telemetry data to the Azure IoT hub, and then using the message routing feature, we'll learn to route the telemetry data to the blob storage for further use. This project will be helpful for anyone who is interested in implementing communication in the Azure IoT hub. You must have some basic knowledge of working with Azure IoT hub and storage accounts.
Azure CLI
Azure IoT hub
device communication
Message routing
Azure Blob Storage
In einem Video, das auf einer Hälfte Ihres Arbeitsbereichs abgespielt wird, führt Sie Ihr Dozent durch diese Schritte:
Introduction and Create IoT hub in Azure
Create devices on IoT hub (VS code, Azure Cli and Azure Portal)
Practice activity: Create a new device in the IoT Hub using Azure cli
Send device-to-cloud (d2c) messages using VS code and azure cli
Send cloud-to-device (c2d) messages using VS code and azure cli
Create an Azure storage account and configure message routing
Simulate a device and use an online simulator to send telemetry messages
Configure file upload in Azure Iot Hub
Cumulative challenge: Register a new device, run the simulator and send the data to the azure storage
Ihr Arbeitsbereich ist ein Cloud-Desktop direkt in Ihrem Browser, kein Download erforderlich
Ihr Dozent leitet Sie in einem Video mit geteiltem Bildschirm Schritt für Schritt an.
Mit dem Kauf eines angeleiteten Projekts erhalten Sie alles, was Sie zum Abschließen des angeleiteten Projekts benötigen, einschließlich des Zugriffs auf einen Cloud-Desktop-Arbeitsbereich über Ihren Webbrowser, der die Dateien und Software enthält, die Sie für den Start benötigen, sowie schrittweise Videoanweisungen von einem Fachexperten.
Da Ihr Arbeitsbereich einen Cloud-Desktop enthält, der für einen Laptop oder Desktop-Computer ausgelegt ist, sind angeleitete Projekte auf Ihrem Mobilgerät nicht verfügbar.
Die Dozenten bei angeleiteten Projekten sind Fachexperten, die Erfahrung in den Fähigkeiten, Werkzeugen oder Bereichen der jeweiligen Projekte haben und leidenschaftlich daran interessiert sind, ihr Wissen weiterzugeben und so Millionen von Lernenden auf der ganzen Welt zu beeinflussen.
Sie können alle von Ihnen erstellten Dateien aus dem angeleiteten Projekt herunterladen und speichern. Zu diesem Zweck können Sie die Funktion „Dateibrowser“ verwenden, wenn Sie auf Ihren Cloud-Desktop zugreifen.
Bei angeleiteten Projekten ist keine Erstattung möglich. Lesen Sie unsere komplette Rückerstattungsrichtlinie.
Für angeleitete Projekte ist keine finanzielle Unterstützung verfügbar.
Für angeleitete Projekte ist kein Auditing verfügbar.
Oben auf der Seite können Sie auf das Erfahrungsniveau für dieses angeleitete Projekt klicken, um das vorausgesetzte Wissen anzuzeigen. Auf jedem Niveau führt der Dozent Schritt für Schritt durch das angeleitete Projekt.
Ja, alles, was Sie zum Abschließen Ihres angeleiteten Projekts benötigen, finden Sie auf einem Cloud-Desktop, der in Ihrem Browser verfügbar ist.
Sie lernen durch Praxis, indem Sie Aufgaben in einer Split-Screen-Umgebung direkt in Ihrem Browser erledigen. Auf der linken Seite des Bildschirms erledigen Sie die Aufgabe in Ihrem Arbeitsbereich. Auf der rechten Seite des Bildschirms sehen Sie einen Dozenten, der Sie schrittweise durch das Projekt führt.
Haben Sie weitere Fragen? Besuchen Sie das Learner Help Center.