Chevron Left
Zurück zu Introduction to Programming with MATLAB

Bewertung und Feedback des Lernenden für Introduction to Programming with MATLAB von Vanderbilt University

16,080 Bewertungen
4,185 Bewertungen

Über den Kurs

This course teaches computer programming to those with little to no previous experience. It uses the programming system and language called MATLAB to do so because it is easy to learn, versatile and very useful for engineers and other professionals. MATLAB is a special-purpose language that is an excellent choice for writing moderate-size programs that solve problems involving the manipulation of numbers. The design of the language makes it possible to write a powerful program in a few lines. The problems may be relatively complex, while the MATLAB programs that solve them are relatively simple: relative, that is, to the equivalent program written in a general-purpose language, such as C++ or Java. As a result, MATLAB is being used in a wide variety of domains from the natural sciences, through all disciplines of engineering, to finance, and beyond, and it is heavily used in industry. Hence, a solid background in MATLAB is an indispensable skill in today’s job market. Nevertheless, this course is not a MATLAB tutorial. It is an introductory programming course that uses MATLAB to illustrate general concepts in computer science and programming. Students who successfully complete this course will become familiar with general concepts in computer science, gain an understanding of the general concepts of programming, and obtain a solid foundation in the use of MATLAB. Students taking the course will get a MATLAB Online license free of charge for the duration of the course. The students are encouraged to consult the eBook that this course is based on. More information about these resources can be found on the Resources menu on the right....



23. Juni 2020

I would like to thank vanderbilt university for providing such a wonderful course and i am much impressed by the use of the basic matrices in each and every programming purpose.thank you again!!!!:)))


19. Dez. 2021

Basics concepts are well covered within a short time and a few videos. I would recommend it for those who want to learn complete basics. but to master it, you need to enrol in a specialization course.

Filtern nach:

4076 - 4100 von 4,178 Bewertungen für Introduction to Programming with MATLAB

von Rahul R

9. Apr. 2021

Course is taught well. Assignments/week are really good as well. However, final three assignments were very tough mainly because the questions did not clearly mention what steps must taken. Thus, the assignments were more like a puzzle to understand the question rather than programming. In real engineering problems where MATLAB is utilized, the programmer clearly knows what steps are to be taken. It is just a matter of translating that into code.

von Allison D

3. Aug. 2020

This is definitely not a beginner' course to programming. i wish there were more assignments on the basics so the student was more comfortable manipulating vertices and matrices. Truly think this online course could have been divided into two sections.

Also, as a math tutor, who is very familiar with word problems and how to determine what is needed and what is given, some of your homework assignments were not very clear.

von marco g

4. Mai 2021

Very useful course for learning Matlab for "beginners". The language is clear and the teacher was professional and fun too. The only drawbacks are the fact that there were no more quizzes after the first weeks of lessons (liked it a lot, it's something that helped me learn step by step) and that some assignments are very difficult compared to the examples expressed in the lessons or even to previous exercises done.

von Amit P

3. Okt. 2020

I think that the course is a great starter for those who want to get familiar with basic programming. There are some problems questions in the assignment which will surely clear the concept and fundamentals of we have learned in the online class. It is great way to get familiar with MATLAB considering the course material is good to begin with.

von Yuqi L

25. Mai 2020

This course is kind of simple and slow if you have previous programming experience and just want learn some Matlab. The videos are sometimes too detailed, I mean, they explain some simple ideas with multiple examples. Also, the practice problems are not enough. But I think it would be a good course for beginners.

von Kislay S

14. Juni 2020

The course was a bit lengthy but constructively designed. Instructor was awesome and he covered everything perfectly. It would have been better if the duration was made smaller and a bit fast paced,as I noticed that after week 4 the contents was a bit too lengthy and slow-paced...

von Carlos F M D

8. Apr. 2020

Really Amazing course with lots of good content and well explained classes that teach you the BASICS. Which was a great experience. But the assignments were not appropriate for a "Introduction to programming with MATLAB" Really hard and frustrating, specially the last exercises

von Samarpreet s

29. Juni 2020

Overall the course is good but the assignment questions are at a different level (especially week 8 and 9). If someone previously have some knowldege about the subject then only he/she can solve the assignments ,otherwise it will consume a lot of time.

von Amr M H A M

21. Aug. 2020

the course was very good but the last 2 weeks are very very hard and not well declared and i recommend using shorter videos than these with giving hints in the assignments about the functions that have to be used without being mentioned in the videos

von Ana G S

4. Juni 2020

Nice video lectures but I wish they were practice problems to do before the assignments. It was quite a jump and hard transition to go from the videos to the assignments. I found them difficult (I have absolutely zero programming background).

von Tarun

17. Juni 2020

the pace at the beginning by the instructor was quite decent but then it picked up suddenly, the final weeks were tough to understand. but somehow i managed to clear. i m not sure if I'll be able to retain it for longer time. hope it helps.

von Álvaro J A G D M B

20. Juni 2020

They say that at the end of course you would be able of programing a computer, but this is not true, the reality is that they will teach some functions (very important) and how you use the Matlab community to get help resolving problems.

von Gwilym C

15. Juli 2020

First 4-5 Weeks were brilliant, but I found the last 3 weeks to be less engaging and I often had to look outside the course for help with the activities because the material given was either not enough or too confusing for me to follow.

von Nanda K R

14. Sep. 2020

The explanation can be quiet brief and clear for better understanding.The topics which arent taught are given in the assignment which makes difficult in solving. Assignment program topics must be completely taught by the instructor.

von Tiago G R

3. Juni 2017

The course is very good but the assignments are very hard for beginners, sometimes you get almost lost, you don't know how to start.

The assignments level is very high compared to the lessons examples.

von Thobile M

28. Sep. 2020

The course was a lot more challenging than I expected for an introductory course. I really struggled from around lesson 4/5. I will practice some more before considering taking the next course.

von Muhammad U

9. Juni 2019

The last two assignments , image blur and echo generator were out of the scope , it took me alot of days to complete it. At least some videos related to these assignments should have been added

von Dhanya J

4. Juni 2020

the content they teach is basic and the assignment problems they give is quite complicated. so i would suggest them to give easy assignments first and then increase the difficulty level

von Kaushal B

30. Juni 2020

I had trouble in too many assignments because several of the commands were used that were not explained in the lecture but has to be used in assignments. Overall it was a great course

von Arthur C

19. Juli 2020

The course is very good, learned a lot. But there is a problem, for a course stated as Introduction, the exercises get much more complex than the classes by the seventh week.

von Mariprasath T

17. Sep. 2021

Its fantastic experience, I am updating my self, my suggestion is course era team should include more tutorial related to real time problem which is solved by MATLAB

von Hemant A

12. Mai 2020

I felt the course was too slow for me, also the assignments given for us to solve, were difficult and there were no hints in the lectures to help the difficulties.

von Virendra M

11. Aug. 2021

decent content but I'm unable to understand what is being taught due to complex understanding by the tutor therefore im not able to complete the course


21. Juli 2020

Assignments are very difficult after 6th week.One enters 7th week without enough preparation.I mean slope of learning is too high after 6th week.


4. Juli 2020

the final assignments are very tough for a beginner to complete. I wish they could work on that.The course's overall content is appreciable