Über diesen Kurs
8,599 recent views

100 % online

Beginnen Sie sofort und lernen Sie in Ihrem eigenen Tempo.

Flexible Fristen

Setzen Sie Fristen gemäß Ihrem Zeitplan zurück.

Stufe „Mittel“

Ca. 8 Stunden zum Abschließen

Empfohlen: 4 hours/week...

Englisch

Untertitel: Englisch

100 % online

Beginnen Sie sofort und lernen Sie in Ihrem eigenen Tempo.

Flexible Fristen

Setzen Sie Fristen gemäß Ihrem Zeitplan zurück.

Stufe „Mittel“

Ca. 8 Stunden zum Abschließen

Empfohlen: 4 hours/week...

Englisch

Untertitel: Englisch

Lehrplan - Was Sie in diesem Kurs lernen werden

Woche
1
2 Stunden zum Abschließen

Root Cause Analysis

In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content....
12 Videos (Gesamt 51 min), 5 Lektüren, 2 Quiz
12 Videos
Purpose of Lean5m
Cause and Effect Diagrams1m
5 Whys4m
FMEA - pt15m
FMEA - pt25m
FMEA - pt36m
Introduction1m
7-Step Model4m
More Tools for Root Cause4m
Counter Measures4m
Single-minute Exchange of Die (SMED)5m
5 Lektüren
Highly-Recommended Text10m
Introduction - Recommended Reading10m
7-Step Model - Recommended Reading10m
Counter Measures - Recommended Reading10m
SMED - Recommended Reading10m
2 praktische Übungen
Root Cause Analysis Practice Quiz20m
Root Cause Analysis Graded Quiz20m
Woche
2
2 Stunden zum Abschließen

Lean Tools

In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content. ...
17 Videos (Gesamt 79 min), 2 Quiz
17 Videos
Poka Yoke3m
Removing Waste5m
Kaizan4m
Kan Ban8m
5S4m
Process Mapping - vid16m
Process Mapping - vid23m
Value Stream Mapping4m
Total Productive Maintenance, Visual Management, & SMED4m
Introduction1m
Lean Philosophy5m
Lean Goals4m
Lean Tools & Systems5m
Case Study 14m
Case Study 23m
Case Study 36m
2 praktische Übungen
Lean Tools Practice Quiz20m
Lean Tools Graded Quiz20m
Woche
3
1 Stunde zum Abschließen

Statistical Process Control (SPC) & Control Plan

In this module, Dr. David Cook will cover statistical process control (SPC) and control plan....
5 Videos (Gesamt 23 min), 2 Lektüren, 2 Quiz
5 Videos
Statistical Process Control - Part 23m
Statistical Process Control - Part 32m
Statistical Process Control - Part 45m
Control Plan6m
2 Lektüren
Statistical Process Control - Recommended Reading10m
Control Plan Recommended Reading10m
2 praktische Übungen
SPC and Control Plan Practice Quiz18m
SPC and Control Plan Graded Quiz20m
Woche
4
1 Stunde zum Abschließen

Lean Tools for Process Control

In this module, Dr. David Cook will cover lean tools for process control....
2 Videos (Gesamt 7 min), 1 Lektüre, 2 Quiz
2 Videos
Lean Tools for Process Control - Part 23m
1 Lektüre
Lean Tools and Process Control - Recommended Reading10m
2 praktische Übungen
Lean Tools for Process Control Practice Quiz20m
Lean Tools for Process Control Graded Quiz20m
4.6
16 BewertungenChevron Right

50%

ziehen Sie für Ihren Beruf greifbaren Nutzen aus diesem Kurs

50%

erhalten Sie eine Gehaltserhöhung oder Beförderung

Top-Bewertungen

von ELApr 29th 2018

SImplified version of the Lean Six Sigma book yet contains a significant amount of information.

von MFeb 21st 2019

Very Very interesting course. Deserved to be taken

Dozenten

Avatar

David Cook, PhD

Assistant Professor of Mechanical Engineering Technology
Department of Mechanical Engineering Technology
Avatar

Bill Bailey, PhD

Assistant Professor of Industrial Engineering
Department of Systems and Industrial Engineering

Über University System of Georgia

The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System....

Über die Spezialisierung Six Sigma Green Belt

This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance. In this specialization, you will learn proven principles and tools specific to six sigma and lean. This is a sequential, linear designed specialization that covers a more advanced level of content (at the "green belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is the second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt. The proper sequence of this specialization is: Course #1 - Six Sigma and the Organization (Advanced) Course #2 - Six Sigma Advanced Define and Measure Phase Course #3 - Six Sigma Advanced Analyze Phase Course #4 - Six Sigma Advanced Improve and Control Phase At the end of Course #4 (Six Sigma Advanced Improve and Control Phase), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization. It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma, but should assist in better preparation for such professional accreditation testing....
Six Sigma Green Belt

Häufig gestellte Fragen

  • Sobald Sie sich für ein Zertifikat angemeldet haben, haben Sie Zugriff auf alle Videos, Quizspiele und Programmieraufgaben (falls zutreffend). Aufgaben, die von anderen Kursteilnehmern bewertet werden, können erst dann eingereicht und überprüft werden, wenn Ihr Unterricht begonnen hat. Wenn Sie sich den Kurs anschauen möchten, ohne ihn zu kaufen, können Sie womöglich auf bestimmte Aufgaben nicht zugreifen.

  • Wenn Sie sich für den Kurs anmelden, erhalten Sie Zugriff auf alle Kurse der Spezialisierung und Sie erhalten nach Abschluss aller Arbeiten ein Zertifikat. Ihr elektronisches Zertifikat wird zu Ihrer Seite „Errungenschaften“ hinzugefügt – von dort können Sie Ihr Zertifikat ausdrucken oder es zu Ihrem LinkedIn Profil hinzufügen. Wenn Sie nur lesen und den Inhalt des Kurses anzeigen möchten, können Sie kostenlos als Gast an dem Kurs teilnehmen.

Haben Sie weitere Fragen? Besuchen Sie das Hilfe-Center für Teiln..