Chevron Left
Zurück zu Motors and Motor Control Circuits

Bewertung und Feedback des Lernenden für Motors and Motor Control Circuits von University of Colorado Boulder

909 Bewertungen
214 Bewertungen

Über den Kurs

This course can also be taken for academic credit as ECEA 5341, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our second course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This second course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers for the above table, the lab on Motor Voltage and Current Measurement. You can copy and paste them into the search engine on the Digikey web site. You need one of each except for the AA batteries (N107-ND), which you would need 3. 428-3390-ND P14355-ND FQU13N10LTU-ND N107-ND 1N5393-E3/54GICT-ND RNF14FTD1K00CT-ND P0.62W-1BK-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on or o Digilent 410-324 | OpenScope MZ available on Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - o SainSmart DSO212 - o PoScope Mega50 USB - o ADALM2000 -



9. Juli 2020

This course and lectures deliver what is promised: about AC and DC motor.\n\nIf you are looking to learn about this subject, this is one of the best online class that you can find.\n\nHappy learning!


9. Apr. 2020

The course has given me a brief idea about how to choose a motor for my application. Real time application videos and laboratory exercises which really enhances the knowledge about AC and DC Motors.

Filtern nach:

151 - 175 von 215 Bewertungen für Motors and Motor Control Circuits

von Kaliappan.S

2. Juni 2020


von Naman B

2. Juni 2020


von Kalavakuri v s r

2. Juni 2020



21. Mai 2020


von Thandava K S P

20. Mai 2020


von Gadhave G G

18. Mai 2020



30. Apr. 2020


von Thippolla A

30. Apr. 2020



24. Apr. 2020



27. März 2020


von S J

27. März 2020


von prajakta s

20. Apr. 2021


von kommala a

3. Jan. 2022



17. Juni 2022


von Jafar J

14. Mai 2021


von Ngo T D

13. März 2021

Great course, great content and learning material. It has real lab exercises with careful instructions. You can still do the assignment without real circuit, but learning by doing will be more efficient, and of course this subject needs real equipment.

The quiz is really helpful for each module lesson, but some of them are a bit difficult or having typing problem. Teachers should acknowledge and correct that.

von Ahmad A

13. Apr. 2020

The this is i needed more information about BLDC machine control, theoretically and practically, to be able to make a full functioning BLDC machine controller. but the information in this course about the Motors is really awesome, thanks for both Professors for the awesome ways of teaching things and thanks for Coursera for giving us the aids to join these wonderful courses♥.

von Guillaume V

22. Dez. 2019

This course is easier than the first of the series. It is quoted Intermediate level by Coursera. There is few formulas but you learn because there are examples, lot of application notes to read, some practice, ... One must study regularly to pass. Then go for the next course in this specialization, a pathway of the master in electrical engineering of the Boulder university.

von Wahyu G

27. März 2020

Doesn't go as I expected. I though it is going to be so much theoretical and turns out to be practical, and not go into details (but go into necessary details for professional engineer, not academia)

von Saurabh S

2. Aug. 2020

it give some basic knowlege about motors and its working and also some knowlege about how to choose specific motor for your project or work th eway of teaching and explaing facts is also very good

von Lizardo A A R

17. Dez. 2021

Very Good Course, I felt that sometimes it went kind of fast but it did help me a lot with specifications and how to choose AC and DC motors for certain applications.


8. Juli 2020

Good one. Will get grip on the basics of the motors. The lecturer is awesome he crack jokes somethings which builds our interests in listening to his lecture.

von siddhant k

17. Sep. 2020

Good Explaination on Motors , but i found the electronics part difficult to understand. Maybe because I am not from that field.

von Tupkar P S

6. Juni 2020

this course was a complete package of information about the motors and their controllers and different parameters measurements.


21. Juni 2020

It is a good course if you want to know about the basic about of the motor and how to control the motor